Welcome to Business card

The Avery Business Card Page

Latest Avery Business Card News

Avery Business Card Questions asked

Open Question: hp 5610 business card alignment problems.?

When I try and print business cards the alignment is way off (the printer starts printing at the very top of the paper. If I print the same document on regular paper it prints perfectly but it is not on business card paper. I have tried Avery 27871 and Avery 8371 paper with the same results. Any solution to get this to work? I am using a Mac with Pages as the program. Thanks :) more

Voting Question: Are there any home printers that can print on stock as small as individual business cards?

I had several thousand business cards printed professionally. Now I would like to be able to print on the back side of them, to add additional information that was not available at the time I originally created them (website, etc.) I know there are scanners specifically sized for business cards. I am wondering if there are any printers (either inkjet or laser) which would allow me to feed in 3.5" x 2" business cards & directly print on them. I am aware of options like getting my order reprinted from scratch, or buying sheets of Avery blanks, but those are not what I am looking for at this point. I would like to be able to use the cards I already have. Are there any home printers that can print on individual 3.5" x 2" card stock? Thanks for your help! more

Resolved Question: I have 10 wide business card paper i want to print to but a margin error in word. Can you help?

Using an HP F2110 Deskjet All-in-1 printer. Royal brights Matte Business cards. I have used Word2007 and 2000 both have the same error. The error says the print is set out of the margins do i want to continue. i say yes it print at the very top part of the paper. very top. say no and nothing happens. I downloaded an Avery layout and all of that is what happens. royal brights even says to use the AVery 5371 or 8371 layouts. Please help. thank a million. more

Resolved Question: How do you setup Microsoft Word 2000 to print Avery 8376 or 8371 Business Cards?

I downloaded Microsoft Word 2000 Business card Template for Avery 8376 or 8371 paper...i bought the paper and put it in the machine, hit print but the cards are not alighed. I went to page Setup and i dont see Avery 8376 or 8371 under the options...how do i set it? Do not answer if you dont know...if you answer just to recieve points I will report to YahooActually i may have Word 2003....its definetly not Word 2007Sam has been reported for Spaming...thank you Sam more

Resolved Question: How can I print multiple business cards on one page?

I was using microsoft publisher 2003 to make business cards. I have Avery paper where I can print ten cards on one sheet. But I don't want the same ten cards. They're all different. How would I set that up? more

Resolved Question: Why won't my business cards print in Microsoft Office Publisher 07?

I have been trying to print some business cards and when I hit print, the document gets qued and then nothing ever happens. I am using Avery 05371, which I have selected in publisher, margins are fine so far, using my regualer, defalt printer that I use for everything else. I can print other projects like photo's and cards just fine? What am I doing wrong? more

Resolved Question: How to get my business cards to print on Avery business card template?

I have a MacBook and I made business cards on Microsoft Word. I'm trying to print them on Avery business cards template #8371 When I print them on regular paper, it prints perfectly how I want it. When I print it on the Avery paper, it prints it on the top edge instead of where it needs to be. How do I get it to work right? more

Resolved Question: Girls I need your advise!?

Ok well I'm avery shy person and almost every-time there is a girl I think is cute she is always with friends. I had a question about this last week and I was wondering, I had an idea about giving girls I liked business cards...but that didn't seem like a good idea but what about cue cards just write a message my # and give it to them while I pass by..well what do you think? You be the JUDGE! more

Resolved Question: How To Correctly Print/Align Avery 8371 Business Cards?

Okay. I am printing out "Raffle Tickets" on Business Cards. I downloaded this template off of Microsoft Office's website and customized it to my liking. http://office.microsoft.com/en-us/templates/TC012299651033.aspx?pid=CT101436061033 I made 100 documents and numbered the tickets from 000-999. That took a whole 3 and a half hours. Before I made everyone of them I printed off one copy to see if it worked. Sure enough it did PERFECTLY. I thought Wow! for once somethings going to be easy and work for me. Well I guess I was wrong. I now went to print off the rest of the cards but for some reason my printer (HP PSC 1350 All-In-One) will not print the tickets on the correct region of the perforated paper. It prints right before the first perforation so that the first two lines are omitted. Basically it starts printing right away rather than leaving a space at the top of the page. Funny thing is when I print it on normal paper it works PERFECTLY! I've tried adjusting my margins, hitting the enter button and moving the document down (on MS Word) but even after that it isn't aligned. I've adjusted settings on the print menu, there isn't a choice for perforated paper. Ugh I've wasted probably 20 sheets of paper and a ton of ink trying to do this. It worked last night and now it isn't at all. I'm running out of ideas. I even restored my computer to last night and it still doesn't work. Please someone help I'm so stressed out about this.Thanks for the fast response George, but I've tried flipping the paper upside down, turning it everything. No luck. I tried calling both Staples and Avery's costumer support but they are both closed. more

Resolved Question: How do I correctly print business cards?

I am using avery.com's Design and Print Online program to "design and print" business cards. So I am finished with the designing part and when I want to print them i click next. It then opens my sheet of 10 identical business cards in a pdf. I click print and scale the page to fit into printable area and print using normal weight printer paper. I hold the now printed business cards in the light with the heavyweight business card paper behind it and everything is where its supposed to be. Now that I'm ready to use the heavyweight paper i load it into the tray in our printer it doesn't print in the correct region. Since the sheet is perforated, it prints right before the first perforation so that the 1st two lines are omitted. this is frustration because when i test i t it's fine! Please help, i've spent days trying to figure this stupid thing out. And it's Avery product 8371, but I'm using the staples version (Inkjet Business Cards, Matte White, Heavyweight) Please give me helpful answers. more

Resolved Question: how do you make business cards with microsoft word?

I am trying to make business cards using word, i want to put my business card info on all of them without having to retype my info for each individual business card, how do i do this? oh and what is Avery is that size. Thank You. more

Resolved Question: business card making problems (printshop & publisher)?

Why is this so hard? I started in print shop spent a whole day designing my double sided business card. Happy with it until the end. I wanted the whole background yellow. It would let me color the background, except leaving me this 1/8’ box around the whole edge of the card. Not good enough (the whole back of the card yellow). So then went to ms publisher (everyone said use ms publisher). Fine, I found what looks like a business card template. Figured out how to color it yellow…good. Tried to import the rest of my file from print shop .biz ext. publisher wont accept the .biz ext. it…now only wondering where is the Avery 8371 template is on publisher…. Is their a solution (not go have someone do it for me) or program that can handle it all? more

Resolved Question: Even character width for column of numbers?

I am typing a list of dates, with numbers, on Word to print on business card Avery labels. I cannot use "tab" on the labels setting, only the space bar between columns. I have tried every font I have and the numbers in the columns (dates) just do not line up - any suggestions welcome. They look horrible as uneven...gosh thanks for the quick responses I had tried to highlight and change the original typing to Courier New and it didn't work... but I retyped the info. in Courier New and it is exactly what I want. Thank you more

Resolved Question: I am trying to print business cards on Word 2003 and I need help!?

I bought Avery printable business card paper and it says to use Template 8373 from Microsoft but it is not available for me...any suggestions on what I can do to get my business cards printed off correctly? more

Resolved Question: What would the "avery template" be for some old "printworks cards" I have?

I have some left over matte finish "print work" cards that I left over. I would like to use my "Avery" friendly program to make the business cards. Anyone know what the compatible template would be for these cards? I need it to measure up to my printer. Thanks. more

Resolved Question: What is Tyler Durden's address?

In the afterword, Palahniuk says that every Avery Denison stationery package has the address of 420 Paper St. Wilmington, DE 19886. However, Palahniuk has never said that the address is correct, and the presence of 420 indicates that it's a fabrication by someone familiar with cannabis culture. In the movie, on Tyler's business card, it says 537 Paper Street, Bradford 19808. The 19808 zip code is Wilmington, so Bradford must be a village in Wilmington. However, the 288 area code is nonexistant, and the Wilmington area code in reality is 302. However, to complicate things, when the Narrator is being interrogated by the cops, he says the address is actually 1537 Paper Street. Which one is right? more

Resolved Question: How come business cards print crookedly (10 pts best answer)

I have an hp printer and when I try to print Avery business cards, they print at an angle for some reason. How do I fix this? more

Voting Question: Business card templates???

ok...i have been trying to use Avery business card templates and i can not get it to open because apparently i cant find my office producy key......i am ready to blow here...does anyone know of a free business card template??? help me!! more

Resolved Question: Business Card Paper Type?

ok so i purchased Avery White Two-sided printable Business cards to be able to print on. I have a hp c5280 inkjet printer, i have just recently noticed that the business card paper says laser on it, will this matter if im using an ink jet printer, i looked where i bought them from and didnt see any paper of the same exact kind that said inkjet, unfortunately they will not return it because it is opened but i am curious if it will still be ok to print on them with?? thanks more

Voting Question: Avery Business Card Crisis!! Please Help! Can't find the normal ones.?

I have been buying Avery Matte White Clean Edge Business Cards for years now and I went to restock on them and can only find Avery Two Sided I went on Avery's website to reorder and can't find them either. I hope I am making a mistake because if Avery discontinued them I will be very upset. The Guy at Office Max said they were the same product however when I purchased them they were a lot worse quality. I can not afford to have bad quality Business Cards thats why Avery has always worked well: I need to order Matte White - Inkjet Clean Edge - Business Cards - 8871 (One Sided) however I can only find the Two Sided!! Please help the two sided are less thicker and worse quality! Avery of course referring to Avery-Dennison Corporation (www.avery.com) more

Resolved Question: How do I get Avery Business card 27881 to print correctly on a HP office jet 5610v.?

I tried adjusting the allignment and using several different softwares. My project will print on plain card stock paper correctly.I was wondering if it was because I use an officejet and the cards require inkjet. I really don't know the difference between the two! more

Resolved Question: How do i create business card templates in photoshop CS3?

Ive tried using the Avery template online which is fine, but i would like to use photoshop so i can get a bit more creative with the business cards. Is there an easy way to make a template in CS3 for the c32028 paper? more

Resolved Question: CAn i make business cards?

in Adobe Photo shop? does any one know the measurements ( photoshop format) so i can make it and print it on avery biz card labels?version 7.0 more

Resolved Question: MAC OSX Leopard user question?

How can i make business cards? i bought Avery labels that are perforated but it will not print unless i buy microsoft office!! HELP! more

Resolved Question: business card creation?

How can you make business cards at home, i've used the avery card sheets but they are to dull they arn't shiny like proffesionaly made cards -- how can i acheive that shiny professional look? are there card sheet that are shiny like photo paper is? Thanks in Advance! more

Resolved Question: How can I find business card templates in Microsoft Word on Vista?

I have business cards from Avery. The template is 27881. They have instructions to find the template in Word but not in Vista Word. Please help! more

Resolved Question: Homework Help!!! I have to prepare a postcard invitation in MS Word as instructed in my text book!!!!?

These are the exact instructions taken from my textbook. Advanced Word Processing Simulation Second Edition. It's the book where they use SBI as your business. Any help would be greatly apprecited. The instructions aren't very detailed. It just tells you what to do and you're supposed to know how. Well, I don't. Here they are: Please prepare a post card invitation for the upcoming small breakfast forum on May 12 using Avery 5389. Make the front of the post card visually appealing. Split the cell on the backside and key the invitation text at the left in a fancy font and add a border around it. I've attached a simple layout. Add merge fields to the address section on the right; then merge the post cards with the presenters' data fi;e you created in Job 03. It says at the bottom that the features I'll be learning are: Borders, Clip Art, Envelopes and Labels, Fonts, Lines and Text Boxes, and Mail Merge. Avery 5389 doesn't look like a post card layout to me. Help!!!! more

Resolved Question: I need serious help w/MS Office Publisher 2007 and its related components.?

I recently downloaded MS Office Pub 07 so I could try it out. I designed a business card and tried printing it out. It will not print correctly (align) in Publisher. I am using Avery 28877. When I try to use Word 07 (as I have been instructed to before), I have no "Tools" prompt on my toolbar where the mailings and labels window is supposed to be. When I try to open my business card file in Word, a window pops up with what appears to be my design in encrypted form and the header reads "file converson". I have no idea what this is or how to correct it. I do have an Avery prompt but all that does is give me access to Avery templates which quite honestly is VERY limited in what it will allow me to create (ex. NO lines can be drawn). It appears that I am not allowed to print my business cards with the trial version of this product. Any help with this matter is greatly appreciated. more

Resolved Question: Avery Business Cards?!?

I have the ten to a sheet avery business cards clean cut kind I have a hp photosmart 8750. I have downloaded the template from Avery's website, and my business cards are still off. They are getting cut off. They're not aligned at all. How do I fix this? more

Resolved Question: What program can I use to PRINT business cards properly?

I have a nice 31/2 inch by 2 inch business card all made out on the computer, I have my card paper in my printer, but I can't seem to be able to print it! What I mean is that I can't find the proper business card paper layout; My printer works fine. I have Avery card paper # 08371. Printer programs seem to not understand printing business cards; I can't find the proper page layout, Microsoft word and other card programs won't let me upload my own work... I don't know if I overlooked something, but I've been trying to figure this out for a couple of hours... Does anyone have any clues?I don't want to make a new card, I want to use the one I've already made, which has a background and text. I made it with someone's card program but I can't use that anymore. more

Resolved Question: How do I align Avery 28877 Clean Edge business cards so that they print correctly?

Printing to a Pixma MP150 from Windows Publisher. Cards are 2x3 1/2. Image is centered approximately 1/8" away from all edges. more

Resolved Question: Printer for Avery Business card paper?

I currently have an HP deskjet 1220c, however, it does not feed perforated paper at all and keeps getting jammed! Right now I am just looking for a color printer that will print on business card and card papers from Avery. I read through a lot of reviews but non seem to target this specific paper feed issue. I don't want to spend too much money for it .. looking for anything that is less then $200 with good color quality for heavy weight papers. Thanks! more

Resolved Question: I downloaded MS Office '07 trial and designed business cards in Publisher but can't get them to print.

I also downloaded Avery MS Word Wizard. When I open up MS Word and try to open up my "business card " file it opens up as illegible script and asks for a "delimiter"? Shouldn't I be able to print the new cards up right from Publisher? And if so how do I go about aligning the Avery cleanedge business cards correctly? more

Resolved Question: Laser printer not printing to right tray?

Hopefully somebody can give me insight in to this general problem. Even after I go to printer setup and select Tray 2 (multi-purpose-feed), it ends up printing from Tray 1. This only occurs with a particular word file I'm trying to print, normally I have no problem printing to the different trays by going to printer setup. Printer: Dell 3110cn Document: Word 2003, avery business card template OS: Windows VistaProblem solved, thanks! The first guy nailed it on the head. I actually solved this problem after doing a search on the net. I came back here to close it but it was already answered. I'll choose you whenever it lets me. more

Resolved Question: Paper jam warning when there is no paper jam?

I've been recently trying to print some business cards, but whenever i'd go to print them, the printer would feed the card paper, but when it'd start to print, it'd stop feeding altogether. A moment later i'd get a prompt saying there is a paper jam, but there really isnt at all. I tried putting the card paper on top max 10 sheets of regular paper, and i also tried printing with one sheet of card paper alone, but still i'm getting the jam prompt. How to fix this? Printer Model: Lexmark P6250 Print/Scan/Copier Card Paper; Avery 08371 more

Resolved Question: Why aren't my business cards formatting correctly?

This is driving me nuts, I am about to pull my hair out. I have tried printing some business cards I created. When I print it the first 2-4 cards come out okay but the last 6-8 are moved up onto the previous card. I used the same image for each card on the sheet. There is no reason why it should not print properly. I also tried doing it on the Avery website but it printed almost exactly the same. Could it be my printer? How do I format it so that it prints correctly and none of the cards get cutoff. Please help, I have been working on this forever and I am going insane. more

Resolved Question: I have an HP 7260 printer. Printer prints business cards on reg paper but not on bus card stock. Won't line up

The printer does great on regular paper but on business card stock (Avery 28877) the business cards print over the tear lines. each set consistently prints higher than the next until they print over the lines. This is causing me to waste lots of expensive BC stock. I'm using windows XP more

Resolved Question: Adobe Illustrator help to print business cards onto Avery template style paper?

I have create a business card design in Adobe Illustrator but do not know how to print it in a set onto the Avery business card paper with the template 8371. Please help me, thanks. more

Resolved Question: Print my own Business cards BLACK?

i want to make my own busines cards. i designed and made them on photoshop. they are 3 by 2.5 inches. they have a black bg. i want to try Avery Clean Edge Inkjet Business Cards, but it says it comes in white cards...are there black cards avaliabe too...or i can just put black color on those white cards! thanks more

Resolved Question: What is the best site for Free business card templates (no vista answers please)?

I need a good business card template, for my reseme writing business I just started, but im cheap, I need a free business card template site, ive tried Avery, office depot'stemplates are boring, and Vista's cards are free, but shipping is outrageous more

Resolved Question: Color printer?

I am trying to print out business cards on Avery 8371 business card paper. The printer I am using is a color printer HP Color LazerJet 2605dn. The business cards are two sided. The first side prints out just fine, but when I print the other side, it smears side 2. A co-worker said that maybe I need to adjust the impression of the color while printing the cards but they never came to show me how to do it. Can anyone help me? more

Resolved Question: Attention computer geeks:?

My mom got Avery business cards. We can't find the template on Microsoft Word. The Avery number is 8871, and we can't find it when I go to Tools, Envelopes and Labels, and Options. Also, i don't want to sound rude when i say 'computer geeks', i'd take that as a compliment. more

Resolved Question: Where can I find wedding favor tags?

I need to find some tags that I can print at home (similar to the avery business cards or labels)...I'm using these really pretty gourmet suckers (twinklecandy.com) for wedding favors...and we are going to put a note/tag on it that says, "Your presence was a sweet gift" Emily & Steven 9-21-07 But I'm having a really difficult time finding tags that I can print at home...any help would be appreciated? -EmiI figured I'd end up having to use the business cards...thats fine though...I was just wondering if anyone knew anything better to use...Thanks for all the answers! more

Resolved Question: How do I get the business cards that I print on my Ink jet not to smudge?

I used Avery glossy paper and find that they smudge even when they are a few months old. I turned them over and printed on the flat side and that seems to work fine. When I look for non glossy cards, they all seem to be treated with some sort of film on top and I am worried that they will smudge as well. Any ideas? more

Resolved Question: How can I make business cards for game cards?

I want to make game cards out of business cards, but I am having some problems here and there. One of them is that I don't know what business card software to use and how to use it. And another one is that I don't know how to make single cards that are different from the rest on one sheet. Any suggestions? Oh, and just to say, my business cards' sizes are all the same as Avery 8377. more

Resolved Question: How do I print business cards with Microsoft "WORD"?

I purchased some Avery business cards to make on my computer but forgot what steps in "Word" to do it. Thanks! more

Resolved Question: How do you copy tables (making biz cards) on Microsoft Word?

To the Microsoft Word experts- I need step by step advice please! I am using MS Word making business cards in the Avery 8371 label template that is embedded in the program. Once choosing the Avery 8371 and displaying the document grid it automatically built out the 10 business cards 2 columns by 5 rows. At the top left business card, I started making my custom card using text and a graphic which I use as my logo. In order to this and make it look like I wanted, I had to build tables (with invisible lines) within tables to seperate the text and the graphic. The card looked awesome! Here's my problem: I cannot copy this business card to the other 9 cards on the same document page becuase it jumbles the tables all up and I don't know what the heck I'm doing. It would take me for ever to build all of these individually and I'm sure they would not all look alike. Is there a way to auto copy all 10 of them to their appropriate biz card fields without this problem ??? more

Resolved Question: tweaking project position in printer?

how can i adjust the position of a project involving my hp psc 2175 all-in-one printer to get my business cards to print correctly. all the cards are a 1/16 of a inch off on the left top and side. all the settings for the avery cards and the graphic software agree but the printer offsets the position. more

Resolved Question: How do you make the sticky backside of printed business cards have a dry, smooth feel?

When I printed business cards using AVERY business card paper, the backside felt as though it was laminated. I want the backside of the paper to feel like a normal, paper business card. Can someone please more

Resolved Question: where do I find openoffice business card templates?

need to download templates for use in openoffice suite, like avery works in MS Word more